It is strictly forbidden to close the valve to start when the high viscosity gear pump is started
2020/07/20 11:04:04
When starting the high viscosity gear pump, the user should carefully check whether the fastening bolts of the high viscosity gear oil pump are loose, whether the coupling of the high viscosity gear oil pump is smooth, and whether there are dead spots. It is strictly forbidden to start the SS high viscosity gear oil pump after closing the valve, which may cause problems such as failure of the high-viscosity gear pump. When the high-viscosity gear pump stops running, the power supply should be cut off and the valve equipment should be closed. When operating, pay attention to the use characteristics of the pump and the operating rules of the equipment. The temperature of the working fluid and the setting of the filtration accuracy require the attention of the staff. When the high-viscosity gear pump is not used for a long time, it should be separated from the machine, cleaned, maintained, and stored for the convenience of next use. Nowadays, the application of high-viscosity gear pumps is more and more extensive, so we must learn more about high-viscosity gear pumps.
