Gear oil pump seal installation skills, saiken pump industry will explain to you 1. The oil gear pump needs to be balanced and symmetrical when installing seals Place the seal at a position that is just close to the sealing surface (or lip line). After installation and use, further observation and follow-up work should be done on the seal to prevent changes in working conditions (such as increased Pressure) and a breach caused by a micro leak occurs. 2. Do not damage the sealing surface or the sealing line when installing the seals of the gear oil pump The upper and lower end faces of the plane seal and the lip line (sealing line) associated with the hydraulic seal hole or shaft determine the sealing performance of the seal. The sealing material of these parts of the seal must have temperature resistance, corrosion resistance and aging resistance Therefore, it is composed of soft and resilient graphite, rubber, plastic, fiber and other easily damaged materials. Therefore, it is necessary to give special protection and attention to the sealing surface or sealing line of the seal during the installation of the seal. Once damaged, it will leave a lot of hidden dangers to the sealed part and cause losses.
