Magnetic drive pump can not make hot water：
Can the magnetic drive pump make hot water? Yes, different materials can be selected according to the specific temperature of hot water. Taking the conventional magnetic pump model of saiken Pump Industry as an example, engineering plastic pumps can handle hot water below 60℃, while metal pumps can handle hot water below 100℃. If there are higher requirements for heat resistance, high temperature resistant materials can be specially customized.
On the magnetic pump can play hot water, no doubt, it is able to, but it is recommended that users choose the corresponding model according to the actual working conditions. In addition to considering the temperature of the medium itself, the pump personnel also need to consider the transport environment and temperature changes, to avoid accidental overtemperature. At present, saiken Pumps have engineering plastic and stainless steel materials to choose from, and corresponding pump types can be configured according to heat resistance requirements. Among them, the stainless steel pump body has a better heat-resistant upper limit. However, it needs to be explained in advance that the magnetic pump mainly transport does not contain particles of debris hot water, including hazardous high temperature liquid, in the selection of the type, can be contacted in advance of the Zhongchengpump industry, so that the selection can be carried out under the guidance of professional and technical personnel.
After understanding whether the magnetic pump can play hot water, in order to help customers have more understanding of the selection, saiken pump industry in addition to the temperature environment, another two important parameters need to be clarified in advance.
1. Operation parameters: Users should be aware that the performance marked by the magnetic pump model refers to the operating parameters obtained from the test run under the premise of clean water as the transport medium. In the actual transport process, due to the different media composition and operating environment, and the possible energy loss caused by pipeline layout in the installation process, it is necessary to enlarge the operation parameters on the basis of actual requirements. It is generally recommended to select between 30% and 100% of the rated flow range, with pressure selection 20% to 30% higher than the actual process pressure.
2, media properties: magnetic pump is mainly transportation purity close to the water medium, at the same time has good corrosion resistance, in addition to clear the temperature change of the medium before the selection, if it is a liquid with chemical composition, should also be aware of the PH value, customized pump body material.
