Does magnetic drive pump need to turn? Need, especially just after installation or maintenance of the magnetic pump, before the boot must be high quality steering, this is in order to check the flexibility of operation, under normal circumstances, the steering should be no card astringent sound, need to be confirmed after use, in order to prevent internal card astringent lead to local overheating and damage after boot.
About magnetic pump need to turn, the answer is yes, the correct turning can maintain the stability of transportation conditions, reduce the probability of accidental failure, the user can through a variety of ways to turn, the common turning convenience is to use the disc coupling, or directly use tools such as wrenches at the entrance of the turning, in addition to the motor fan for turning. The way of turning is uncertain, choose the right one, as long as you can confirm the flexible operation of the magnetic pump, turning operation needs more than one and a half laps, generally 540 degrees.
In the process of turning, if the obvious too heavy too tight, or simply do not move, you should timely check the overall condition of the pump, not forced boot. First of all, you can check whether there is liquid crystallization in the pump leading to the solidification of the moving components, or there is a foreign body stuck in the pump body, which needs to be removed after the pump inspection. In order to avoid this situation, it is suggested that after each use of the magnetic pump, the pump chamber should be cleaned in time and the fluid should be cleaned together to ensure the flexibility of the pump.
After knowing whether the magnetic pump needs to turn the wheel, it is worth explaining that there may be a certain inertia in the process of turning the wheel, so the operator should pay extra attention to avoid limb injury, and it is suggested to arrange the division of labor between the commander and the operator to strengthen personal safety.
To sum up, it simply explains the relevant issues of magnetic pump need to turn the wheel, in order to ensure the stability of transportation, users should properly turn the pump, some high-power models after the wheel pump is correct, should also do a good job of preheating and lubrication, to avoid rapid temperature rise of the pump chamber, in addition, after turning the pump, the personnel can make a corresponding record of the magnetic pump equipment name and turning time, etc. More Pump Information Sustainable focus on SAIEKN Pumps.
