Pneumatic diaphragm pump structure in the role of the diaphragm:
Pneumatic diaphragm pump internal structure, there is a structure plays a very important role. This structure is called the inner diaphragm. The inner diaphragm is necessary to have a certain device method through the correct process mode into the inside of the pump, it is possible to play a better role. Industrial production, for the inner diaphragm device process has a set of more scientific inspection criteria. General inner diaphragm for pneumatic diaphragm pump type or make material requirements are not high, so most of them can be directly installed into the pump body, so the construction is very flexible, welcomed by the major manufacturers; With the inner diaphragm, the performance of the pump body can be further improved
Pneumatic diaphragm pump is carried out prior to the device. Technical personnel first to understand the volume change of the pump, to see if the equipment in the diaphragm at the same time, will affect the volume of the pump shaking. It is necessary to note that the internal diaphragm device should be geometrically adjusted to better use the diaphragm for better compression characteristics. The inner diaphragm device is simple, will not bring extra cost to industrial production, save human resources. More importantly, it can greatly improve the durability of the pump body diaphragm, for the mass production process to provide more powerful protection.
