What parameters do you need to buy a magnetic drive pump? And other pump type selection need to be clear flow, pressure, power and other parameters, but also need to consider the composition of the medium attributes and transportation environment, the correct selection can make the transportation process is always stable, it is recommended to arrange professional and technical personnel and manufacturers to communicate the relevant details, to ensure that the pump type and transportation project required parameters match.
As for what parameters are needed to buy magnetic pump, SAIKEN pump industry simply sorts out relevant matters, as follows.
1. Operation parameter requirements: The performance parameters marked by the magnetic pump are obtained from the test run with clean water as the object. In actual transportation, due to the different proportion of media, installation environment and pipeline layout, it is necessary to consider that the actual performance may not reach the theoretical performance. When selecting performance parameters, you are advised to select 30%-100% of the rated flow range and 20% of the pressure higher than the actual requirement.
2, pump material selection: At present, the magnetic pump is mainly made of stainless steel, fluorine plastics, engineering plastics and other materials, users need to choose the corresponding pump body material according to the properties of the medium, mainly to confirm the corrosion intensity of the medium, and temperature changes, if there is a high demand for acid and corrosion resistance can choose fluorine plastic pump, if the medium temperature is high, then choose stainless steel pump, If the transport medium contains fine hard particles, also need to customize wear-resistant seal.
What parameters do you need to buy magnetic pump? Mainly is the above two aspects, in the actual selection will be specialized to cooperate with the selection of manufacturers, so users do not need to have too much worry in the selection, only need to clear the media in advance of the basic attributes and parameter requirements. However, it is worth noting that after confirming the matching performance, it is necessary to ensure that the installation and pipeline layout meet the standards before subsequent use, in order to prevent the loss of pump performance resulting in substandard operation. Relevant details can be directly consulted by SAIKEN pump station technical customer service to communicate.
