Magnetic drive pump to filter? Considering that the magnetic pump is mostly used to transport the media strictly prohibited from leaking, the safety requirements are higher, so it is generally recommended to install a filter to ensure the stability of the transport process, but if the transport medium is pure liquid, does not contain particle impurities, and the transport process will not change, can be properly considered whether to install a filter.
About the magnetic pump to filter, it is necessary to clarify the significance and function of the filter, in order to avoid hard particles into the pump cavity wear pipe wall, if the number of particles is more, and may wear through the isolation sleeve, resulting in the harm of medium leakage, if it is containing magnetic broken iron, it will cause serious wear, add filter is to avoid this situation. So whether to add filter depends on the composition of the media, the user should be clear in advance of the content of the media to determine the composition.
After knowing whether the magnetic pump filter this problem, in order to facilitate you to have more understanding of the characteristics and use of this type of pump, the following is a brief introduction.
Magnetic pump is a leak proof high safety sealing pump, similar in function to diaphragm pump, shield pump and so on, but compared with other sealing pump, magnetic pump whether the driving method or the selection of material are more superior, so has a higher safety level, can be assured to transport flammable, explosive gas liquid, under the premise of proper maintenance can be used for a long time without fault.
It should be noted that the magnetic pump medium adaptability is weak, can only transport a single component of the gas liquid, if contains fine particles can be added filter, but if the medium contains particles unit volume exceeds the standard, it is strictly prohibited to use, otherwise there is a risk of damage. In the actual running process, because it cannot be used idling, it is necessary to monitor the running parameters to avoid accidental flow interruption.
After the above introduction, I believe you also have a clear understanding of whether the magnetic pump filter. If you are interested in knowing more details, you can directly consult the technical customer service of SAIKEN pump station.
