The high-viscosity gear pump of Saiken Pump Industry is used for conveying liquid paraffin oil and calcium powder mixture
What kind of pump is used to transport liquid paraffin oil and calcium powder mixture? It is recommended to choose high-viscosity gear pumps for transporting liquid paraffin oil and calcium powder. Paraffin oil is a kind of mineral oil, which is a colorless and odorless mixture obtained from the fractionation of crude oil. The main components are C and H, and the chemical element symbol is CxHy, which can be used in food, medicine and industry. Paraffin wax is a kind of mineral wax and also a kind of paraffin oil; it is a wax paste prepared by solvent refining, solvent dewaxing, or freezing and squeezing dewaxing of the lubricating oil fraction obtained from crude oil distillation, and then solvent dewaxing. The flaky or needle-like crystals obtained from oil and refining are also called crystalline wax, with a carbon number of about 18～
30 hydrocarbon mixture, the main component is straight-chain alkanes (about 80%-95%), there are also a small amount of individual branched alkanes and monocyclic cycloalkanes with long side chains (the total content of the two is less than 20% ). Wax oil mixture refers to the raw material made by mixing paraffin wax with calcium carbonate powder mixture after heating in equipment. Saiken pump industry specializes in developing and customizing a high-temperature, wear-resistant high-viscosity gear pump for users to transport asphalt mixtures, rubber liquid mixtures, wax oil mixtures, etc.
Advantages of high viscosity gear pump:
1. The high-viscosity gear pump is simple in design, compact in structure, and easy to install and maintain.
2. The high-viscosity gear pump conveys liquid smoothly, without pulsation, low vibration and low noise.
3. High viscosity gear pump has strong self-priming performance.
4. Select the parts and materials correctly. The high-viscosity gear pump can transport a variety of corrosive media, and the applicable temperature can reach 300℃.
5. The rotation of the inner and outer rotors of the high-viscosity gear pump is the same, with little wear and long service life.
6. The high-viscosity gear pump has a wide range of liquid types and viscosity.
7. The speed of the high-viscosity gear pump has a linear function relationship with the flow rate, and the flow rate of the pump can be changed by changing the speed appropriately.
8. The end face clearance of the high-viscosity gear pump is easy to adjust. When the rotor is worn out, the end face clearance can be easily adjusted to meet the requirements of working conditions without disassembling the pump.
