KCB gear pump results and uses： KCB gear pumps are mainly composed of gears, shafts, pump bodies, protection valves, and shaft end seals. The gear pump has high hardness and streng...
2021/06/07
The scope and main purpose of KCB gear pump: KCB18.3——83.3 The main drive gear is a pair of helical cylindrical gears with a direct-acting safety valve. The KCB200—960 main drive g...
2021/06/07
The gear oil pump is an important component that raises the low-pressure oil in the oil tank to the high-pressure oil capable of doing work through the rolling mesh of a pair of in...
2021/06/07
Working principle of KCB gear pump The gear oil pump is an important component that raises the low-pressure oil in the oil tank to the high-pressure oil capable of doing work throu...
2021/06/04
KCB gear pump installation instructions: 1. The place where the pump is installed should be spacious enough to facilitate maintenance work. 2. The quality of the pump installation ...
2021/06/03
KCB gear pump performance： The performance parameters of various gear pumps are determined when the medium viscosity is 4×10-3m2/s (40cSt). The parameter values given in the perfor...
2021/06/03
KCB gear pump structure characteristics： KCB gear pumps are mainly composed of gears, shafts, pump bodies, safety valves, and shaft end seals. The gear has high hardness and streng...
2021/06/03
ISG vertical pipeline pump working conditions: 1. Suction pressure ≤1.0Mpa, or the highest working pressure of the pump system ≤1.6Mpa, that is, pump suction port pressure + pump h...
2021/06/02
The main purpose of ISG vertical pipeline pump: 1. The ISG vertical pipeline centrifugal pump is used to transport clean water and other liquids with physical properties similar to...
2021/06/02
Saiken Pumps will give you a brief introduction to ISG vertical pipeline pumps: Vertical pipeline centrifugal pump ISG series single-stage single-suction vertical pipeline centrifu...
2021/06/02