Any water pump product needs to be installed first if it wants to be used normally. Pipeline pump is one of the common transportation equipment in the current urban water system. Many people have questions about related installation and installation. Recently, users have consulted on the installation direction of pipeline pumps. In this regard, SAIKEN Pumps has made relevant introductions on related installation and use matters for reference.
Regarding the installation direction of the pipeline pump, the installation can only be carried out after distinguishing the inlet and outlet directions. The confirmation methods of different models are slightly different. The horizontal structure of the pipeline pump is better to distinguish. You can directly observe the diameter for confirmation. The vertical is the outlet, and the horizontal is the outlet. It is an inlet; the inlet and outlet of the vertical structure pipeline pump have the same caliber and are located on the same centerline. In terms of installation, there are generally obvious marks on the pipeline pump. For example, the outlet of a horizontal pipeline pump supports three directions of left, right, and upwards.
After knowing the installation direction of the pipeline pump, in order to reduce improper operation for users, SAIKEN Pumps briefly introduces several installation related matters needing attention.
1. Check the size of the pump before installation, confirm the installation position and height, and ensure that all installation standards are met;
2. Clean up the surrounding environment, leave enough operating space for the installation process and avoid foreign matter interference. At the same time, check the pipeline and circuit to confirm that the wiring is normal and the pipeline is compacted to avoid air leakage;
3. Keep the installation level, the pump and the ground need to keep a certain distance, so that the air can be discharged freely;
4. The importance of the pipeline cannot be directly applied to the pump body and the ground, and additional support is required;
5. Some types of pipeline pumps are equipped with a bottom valve, and the end of the water inlet pipe needs to be kept in a vertical state, otherwise the valve cannot be closed, which will cause water leakage.
