Max. Flow: 60m3/h ;Max. Head: 448m ;Application Limits ;Max. ambient temperature< 40℃; ;Sand content(in mass fraction)up to 0.01%; ;hydrogen sulfide content up to 1.5mg/L, chloride...
Max. Flow: 22m3/h ;Max. Head: 480m ;Application Limits ;Max. ambient temperature< 40℃; ;Sand content(in mass fraction)up to 0.01%; ;hydrogen sulfide content up to 1.5mg/L, chloride...
Max. Flow: 7.2m3/h ;Max. Head: 169m ;Application Limits ;Max. ambient temperature< 40℃; ;Sand content(in mass fraction)up to 0.01%; ;hydrogen sulfide content up to 1.5mg/L, chlorid...
Max. Flow: 3.6m3/h ;Max. Head: 142m ;Application Limits ;Max. ambient temperature< 40℃; ;Sand content(in mass fraction)up to 0.01%; ;Hydrogen sulfide content up to 1.5mg/L, chlorid...
Size: 3/8" to 14" ports ;Capacity: 1 LPM to 9600 LPM ;Max working pressure: 14.5 kg/cm ;Gears: Spur or helical gearing arrangement ;Seal: Teflon Gland pack or mechanical seal ;Rota...
Technical Parameters of NYP Stainless Steel Internal Gear Pump ;MODEL:NYP0.78,NYP2.3,NYP3.6,NYP7.0,NYP24,NYP52,NYP80,NYP111,NYP160,NYP320, NYP220,NYP650,NYP727,NYP1670. ;Rotationa...
Flow Rate Up to 1250m³/h ;Max Head (pressure) Up to 100m ;Sizes:DN20-350mm Outlet ;Max Temperature:350°C
3 inch Air Operated Pump in Teflon / Santoprene ;Maximum Flow gpm (lpm): 150（568） ;Maximum Discharge Pressure psi (bar): 120 (8.4) ;Fluid Ports Inlet/Outlet (bsp): 3 inch ;Air In...
2.5 inch Air Operated Pump in Teflon / Santoprene ;Maximum Flow gpm (lpm): 100（378.5） ;Maximum Discharge Pressure psi (bar): 120 (8.4) ;Fluid Ports Inlet/Outlet (bsp): 2.5 inch ;...
2 Inch Plastic Pneumatic Diaphragm Pump ;Maximum Flow gpm (lpm): 100（378.5） ;Maximum Discharge Pressure psi (bar): 120 (8.4) ;Fluid Ports Inlet/Outlet (bsp): 2 inch ;Air Inlet :1...
1.5 Inch Plastic Pneumatic Diaphragm Pump ;Maximum Flow gpm (lpm): 40（151） ;Maximum Discharge Pressure psi (bar): 120 (8.4) ;Fluid Ports Inlet/Outlet (bsp): 1.5 inch ;Air Inlet :...
1 Inch Plastic Pneumatic Diaphragm Pump ;Maximum Flow gpm (lpm): 15 (57) ;Maximum Discharge Pressure psi (bar): 100 (7.0) ;Fluid Ports Inlet/Outlet (bsp): 1 inch ;Air Inlet :1/4...
Maximum Flow gpm (lpm): 5.8 (22) ;Maximum Discharge Pressure psi (bar): 100 (7.0) ;Fluid Ports Inlet/Outlet (bsp): 1/2 inch ;Air Inlet :1/4 inch ;Material of Construction: Cast...
Maximum Flow gpm (lpm): 5.8 (22) ;Maximum Discharge Pressure psi (bar): 100 (7.0) ;Fluid Ports Inlet/Outlet (bsp): 3/8 inch ;Air Inlet :1/4 inch ;Ma...
Flow Rate Up to 1250m³/h ;Max Head (pressure) Up to 100m ;Sizes:DN20-350mm Outlet ;Max Temperature:350°C
Materials in contact with the liquid: casing and impeller PP/PVDF; ;Flow 400LPM; Head 26 mlc; ;Max temperature: PP 70°C – PVDF 90°C; ;Max viscosity: 200 cSt; ;Voltage: 3Phase 220V/...
SKQ-10 SKQ-15 ;Max Flow: 5.8 gpm (18.9 lpm) 5.8 gpm (18.9 lpm) ;Max Pressure: 100 psi (0.7Mpa,7...
Material: Stainless steel, Cast Iron, Aluminium alloy, PP, plastic, Fluoroplastic,PTFE, PFA ;Size: 1/2” ~4” , DN10mm~DN125mm ;Flow Rate (Q) 0 - 60 (m3/h) ;Lift Head (H) 0 - 70 (m)
Flow Rate Up to 9600L/min ;Material：SS 304 SUS 316 316L ;Max Head (pressure) Up to 1.45Mpa ;Outlet Sizes Up to 14" inch ;Max Temperature:250°C
Flow Rate Up to 9600L/min ;Max Head (pressure) Up to 1.45Mpa ;Outlet Sizes Up to 14" inch ;Max Temperature:250°C
Flow Rate Up to 150M³H ;Max Head (pressure) Up to 8 Bar ;Sizes: DN1/2”- DN200 Outlet ;Max Temperature:350°C ;Material: Cast steel,SUS304, SUS316 stainless steel
Flow Rate :1.6-2600m3/h ;Head H: 5-300m ;Speed N:1420-2950r/min ;Caliber: 25-400mm ;Temp Range T:Hot water of 280 ℃ or less; Heat exchange medium ≤400℃ ;Material: cast steel, du...
Maximum capacity - 130 cu m/hr ;Maximum pressure - 10 kg/cm2 ;Maximum solid size - 10 mm ;Maximum port size-200mm (8 inch) ;Viscosity - 3,00,000 CST ;Operating temperature - 250 de...
Specifications: (50/60Hz） ;Power of motor: 0.4-3.75 KW ;Rate of flow: 150-550 L/min ;Head: 12.5-37 m ;Material: FRPP，PVDF ;Temperature: 0~75℃（FRPP), 0~90℃（PVDF）
Flow Rate Up to 500M³H ;Max Head (pressure) Up to 140m ;Sizes: 25-300mm ;Max Temperature:350°C ;Impeller: Close impeller ;Seal: Mechanical seal ;Speed: 2900r/min,1450r/min
Flow Rate Q:15~200m³/h ;Head H:10~150m ;Speed N:1420-2950r/min ;Caliber: Φ32~Φ150mm ;Temp Range T:0~+150℃ ;Service Pressure P: Max 1.2Mpa
Flow Rate Up to 9600L/min ;Max Head (pressure) Up to 1.45Mpa ;Caliber:3/4"to 14" ;Max Temperature:180°C ;Material:CS / CI / SS（304/316/316L）
Temperature Range: -15~120℃ ;Ambient Temperature: up to 40℃ ;Max Operating Pressure: 10 Bar ;Min Suction Pressure: Min Safe ;Head NPSH + 0.5m
Flow Rate Up to 870LPM ;Max Head (pressure) Up to 30m ;Sizes: DN1 1/2"- 2 1/2" ;Max power: 4kw